Highway Single Wall Pipe

Pairing Strength and Design for Exceptional Performance

ADS Highway Single Wall pipe delivers superior value while providing physical strength and structural design that just cannot be matched by metal or concrete. Each pipe is backed by ADS' more than 50 years of pipe and drainage innovation. ADS Highway Single Wall pipe is lightweight, which translates into easy handling for faster, less costly installations.

  • Available in 100’ - 3,200’ (30 - 960 m) coil lengths for 3” - 6” (75 - 150 mm) diameter pipe
  • 8” - 24” (200 - 600 mm) diameter pipe is available in 20’ (6 m) lengths
  • Meets soil-tight joint performance requirements - gasketed or non-gasketed split coupler, and internal and external snap couplers are available
  • Longer lengths, which vary by diameter, result in fewer joints - pipe can be cut easily to the desired length in the field
  • Easy-to-handle, safe, lightweight pipe requires less labor and equipment for faster installation and reduced costs
  • HS-25 (Highway traffic loads) rated with a minimum of 12” (300 mm) of cover
  • Withstands repeated freeze/thaw cycles and continuous sub-zero temperatures

Find a Rep

Product Information

Piping that provides superior resistance to chemicals, road salts, motor oil and gasoline that is rust resistant and won't deteriorate or crumble over time.

Pipe dimensions

Nominal Pipe I.D. *in. (mm) 3 (75) 4 (100) 5 (125) 6 (150) 8 (200) 10 (250) 12 (300) 15 (375) 18 (450) 24 (600)
Nominal Pipe O.D.** in. (mm) 3.6 (91) 4.6 (117) 5.8 (147) 7 (178) 9.5 (241) 12 (305) 14.5 (368) 18 (457) 22 (559) 28 (711)

*Check with sales representative for availability by region. **Pipe O.D. values are provided for reference purposes only, values stated for 3- through 24-inch are ±0.5 inch. Contact a sales representative for exact values.

Downloads

Submittal Packages

Sell_Sheet_Heavy_Duty_SW_Pipe_08_12
Drainage_Handbook_ADH1-Specifications 04-05-18
Sell_Sheet_Highway_Pipe_08_12
Minimum_and_Maximum_Cover_Depths_3in-24in_SingleWall_HDPE_Pipe_(Tech_Note_A2.03)

Installation Guides

Installation_Single_Wall_Sloped_Pipe_w_Split-Coupler_Stainless_Steel_(Detail_801B_02-16)-Model
Installation_Single_Wall_Sloped_Pipe_w_Split-Coupler_(Detail_801A_02-16)-Model
Installation_Single_Wall_Sloped_Pipe_w_MARMAC_Coupler_(Detail_803_02-16)-Model
Installation_Positive_Projection_Embankment_(Detail_102_01-16)-Model
Installation_Sand_Embedment_of_Corrugated_Polyethylene_Pipe
Installation_Single_Wall_Sloped_Pipe_w_Dbl_Wide_Split_Coupler_Stainless_Steel_(Detail_802B_02-16)-Model
Soil_Classes_of_Embedment_and_Backfill_Materials_(Detail_109_01-16)-Model
Installation_Single_Wall_Sloped_Pipe_w_Double_Wide_Split-Coupler_(Detail_802A_02-16)-Model
Installation_Pipe_Anchoring_12in_to_60in_(Detail_104_01-16)-Model
Drainage_Handbook_ADH5_Installation_(11-16)

Specifications

Specification_ADS_SINGLE_WALL_HIGHWAY_PIPE_3in_to_24_2017
Drainage_Handbook_ADH8_References_Standards_(06-14)

Details - Product

Single_Wall_Perf_Patterns_(Tech_Note_A1.02)

Structural Design - Technical Literature

Drainage_Handbook_ADH2_Structures_(05-15)

Hydraulics - Technical Literature

Drainage_Handbook_ADH3_Hydraulics_(07-14)

Durability - Technical Literature

Chemical_Resistance_PE-Elastomers_(Tech_Note_A4.01)
Drainage_Handbook_ADH4_Durability_(11-15)

Fittings

Fittings_Integral_Bell_Transition_for_HDPE_Pipe_(Tech_Note_A5.10)
Fittings_Integral_Bell_Transition_(Prod_Note_3.105_02-02)
Fittings_HDPE_Dual_Wall_Tees
Fittings_HDPE_Dual_Wall_Wyes
Fittings_HDPE_Dual_Wall_Reducers
Fittings_HDPE_Dual_Wall_Fabricated_Reducers
Fittings_HDPE_Dual_Wall_Fabricated_Bends
Fittings_HDPE_End_Caps_Plugs
Fittings_HDPE_Dual_Wall_Misc
ADS_Fittings_Manual_-_09-16-16

Brochure

Water Management Product Catalog 2018
Brochure_Residential_Irrigation___Landscaping_ADS_(10663_12-16)