Downspout Drainage

ADS Non-Perforated Pipe carries rainwater away from houses and keeps water from seeping down basement walls and creating wet basement problems. This piping can be attached to downspouts, storm drain inlet, street curb and other disposal areas.

Place an ADS Downspout Adapter on the end of the downspout, snap the ADS Non-Perforated Pipe into the snap coupling end of adapter, and run ADS Non-Perforated Pipe to the disposal area. If a shallow line is needed from the downspout, an ADS 90° elbow can be used. ADS tees, wyes and other fittings are available for connecting two or more downspouts to the same line.

ProductsDocuments

Documents

Submittal Packages

Installation Guides

Specifications

Details - Product

Single_Wall_Perf_Patterns_(Tech_Note_A1.02) Connection_HDPE_and_HP_Storm_to_Manholes_and_Structures_A5.04_March_2016 Connection_HDPE_Bell_to_RCP_(Detail_605_02-16)-Model Connection_HDPE_CMP_(Detail_601) Connection_HDPE_CMP_wMarMac_(Detail_602) Connection_HDPE_RCP_(Tech_Note_603) Perforation_Patterns_DW_HDPE_Pipe_(Tech_Note_A101_01-15) Connection_HDPE_RCP_Bell_(Tech_Note_605) Connection_HDPE_RCP_w_MarMac_(tech_Note_604) Connection_HDPE_to_CMP_w_Geotextile_Wrap_(Detail_601_02-16)-Model Connection_HDPE_to_CMP_w_MarMac_(Detail_602_02-16)-Model Connection_HDPE_to_HDPE_(Detail_607_02-16)-Model Connection_HDPE_to_HDPE_w_MarMac_(Detail_608_02-16)-Model Connection_HDPE_to_Manholes_and_Structures_(Tech_Note_A5.04) Connection_HDPE_to_RCP_w_Geotextile_Wrap_(Detail_603_02-16)-Model Connection_HDPE_to_RCP_w_MarMac_(Detail_604_02-16)-Model Connection_HDPE_to_Structure_(Detail_201_01-17)-Model Connection_Integral_Bell_Transition_for_HDPE_Pipe_(Tech_Note_A5.10_01-10) Connection_Integral_Bell_Transition_for_HP_Pipe_(Tech_Note_A5.15_01-10) Connection_MH_Grouted_Waterstop_12in_to_60in_HDPE_(Detail_203_01-16)-Model Connection_Soil_Tight_MH_Nyloplast_Adapt_12in_to_24in_HDPE_(Detail_202A_01-16)-Model Connection_Water-Tight_MH_Boot_Adapter_12in_to_24in_HDPE_(Detail_204F_01-16)-Model Connection_Water-Tight_MH_Boot_Adapter_12in_to_60in_HDPE_(Detail_204B_01-16)-Model Connection_Water-Tight_MH_Gasket_and_Corr_Pipe_Adapter_Gasket_12_to_60_HDPE_(Detail_204E_02-16)-Model Connection_Water-Tight_MH_Mechanical_12in_to_36in_HDPE_(Detail_204D_02-16)-Model Connection_Water-Tight_MH_Precast_Compression_Gasket_12in_to_60in_HDPE_(Detail_204A_02-16)-Model Connection_Water-Tight_MH_Precast_Compression-Gasket_12in_to_24in_HDPE_(Detail_204C_02-16)-Model HDPE_Dual_Wall_Pipe_Perforation_Patterns_(Tech_Note_A1.01) N-12 Mitered Joint Pusher_(Detail_6086) Pipe_Flotation_(Tech_Note_5.05_03-16) Pipe_Joints_and_Gaskets_(Tech_Note_A1.05) ADS Pipes & Nyloplast Structures Catalog into AutoCAD Civil 3D Installation_Detention_Infiltration_System_HDPE_Pipe_Cross-Section_(Details) Roof_Drain_45_Deg_Wye_Cleanout_(Product_Detail_1001_04-16)-Model Roof_Drain_45_Deg_Wye_Cleanout_and_Fitting_(Product_Detail_1003_04-16)-Model Roof_Drain_Tee_Cleanout_(Product_Detail_1002_04-16)-Model

Inspect. & Maintenance. - Technical Literature

Structural Design - Technical Literature

Hydraulics - Technical Literature

Durability - Technical Literature

Fittings

Case Studies/Approvals

Brochure