Field Drainage Mains

The sizing and maintenance of agriculture mains is crucial for the performance of drainage systems. No matter how many acres need to be drained, ADS has a product to fit your specific installation needs. For agriculture mains, we offer both perforated and solid single wall corrugated pipe in sizes up to 24” (600mm). Maxi coils of large diameter pipe are available in sizes up to 12” (300mm). A maxi coil of 12” (300mm) pipe contains 330’ (100m), 10” (254mm) contains 520’ (158m), and 8” (203mm) contains 820’ (250m). The smooth interior of N-12® HDPE drainage pipe reduces friction, allowing water to flow smoothly, while its corrugated exterior allows for superior strength beneath farm equipment.

N-12 pipe is manufactured with integral bell couplers or plain end pipe with split couplers to make installation simple. N-12 pipe meets the standards of ASTM 2648, AASHTO M252 or AASHTO M294 depending on product type and diameter. For installation information, please refer to ADS IG1.03 and Plastic Pipe Institute TN-37/2006. ADS manufactures tees for all sizes of pipe that make it easy to connect the submains and laterals to the main line—saving time and money. Also available are 4” tap tees that allow the lateral to be connected to the agriculture main by drilling a hole and then inserting the tap tee.

Field drainage mains can also be used for culverts, grain aeration and animal feed operations for waste removal.

ProductsDocuments

Documents

Submittal Packages

Specification_ADS_SINGLE_WALL_HIGHWAY_PIPE_3in_to_24_2017 Chemical_Resistance_PE-Elastomers_(Tech_Note_A4.01) Sell_Sheet_Heavy_Duty_SW_Pipe_08_12 Drainage_Handbook_ADH1_(02-17) Single_Wall_Perf_Patterns_(Tech_Note_A1.02) Sell_Sheet_Highway_Pipe_08_12 Fittings_HDPE_Dual_Wall_Tees Fittings_HDPE_Dual_Wall_Wyes Fittings_HDPE_Dual_Wall_Reducers Minimum_and_Maximum_Cover_Depths_3in-24in_SingleWall_HDPE_Pipe_(Tech_Note_A2.03) Fittings_HDPE_Dual_Wall_Fabricated_Reducers Fittings_HDPE_Dual_Wall_Fabricated_Bends Fittings_HDPE_End_Caps_Plugs Fittings_HDPE_Dual_Wall_Misc Specification_ADS_HP_STORM_12in_to_60in_PIPE_2017 Minimum_and_Maximum_Cover_Depths_for_12in-60in_HP_Storm_(Tech_Note_2.04_12-16) Chemical_Resistance_PP-Elastomers_(Tech_Note_A4.02) Fittings_HP_Storm_(ADS Detail_05-14) Minimum_and_Maximum_Cover-Heights-for-ALT-Trench-for_12in_60in_HP-Storm_(Tech_Note_A2.04A_08-15) Minimum_Cover_Temporary_Single_Axle_HP_Pipe_(Detail_111D_04-16)-Model Specification_ADS_N-12_PLAIN_END_PIPE_(PER_AASHTO)_4in_to_60in_2017 Minimum_and_Maximum_Cover_Depths_4in-48in_F2648_Pipe_N-12_(Tech_Note_A2.02) Installation_Culvert_Mitered_End_(Detail_302_02-16)-Model Specification_ADS_N-12_ST_IB_PIPE_(ASTM_F2648)_4in_to_60in_2017 Specification_ADS_N-12_WT_IB_PIPE_(PER_AASHTO)_4in_to_60in_2017 Installation_Culvert_Mitered_End_Section_(Product_Detail_301_02-16)-Model Installation_French_Drain_Perforated_HDPE_Pipe_(Detail_106A_01-16)-Model Perforation_Patterns_DW_HDPE_Pipe_(Tech_Note_A101_01-15) Sell_Sheet_N-12_Soil_Tight_Int_Bell_(ASTM_F2648)_(10628) Sell_Sheet_N-12-WT-IB-ASTM-F264_(08-15) Sell_Sheet_N-12_Soil_Tight_Int_Bell_(AASHTO)_(10581) Sell_Sheet_N-12-WT-IB-AASHTO_(10582_08-15) Sell_Sheet_N-12_Soil_Tight_Iint_Bell_(ASTM)_(10628) small dia n-12 pipe and fittings Specification_NY_Region_of_York_Storm_Sewer Specification_Richmond_Storm Sewer_2011 PE_Section_for_Culvert_Applications_(Product_Note_3.104) Specification_ADS_SANITITE_HP_PIPE_12in_to_60in_2017 Minimum_and_Maximum_Cover_Depths_for_12in-60in_SaniTite_HP_(Tech_Note_2.09_12-16) Sell_Sheet_AG_Drainage_Pays_Flyer_(AD901214) Brochure_Agriculture_Total_Drainage_Solution_(04-01) Sell_Sheet_Hinged_Tee_web

Installation Guides

Installation_Single_Wall_Sloped_Pipe_w_Split-Coupler_Stainless_Steel_(Detail_801B_02-16)-Model Installation_Single_Wall_Sloped_Pipe_w_Split-Coupler_(Detail_801A_02-16)-Model Installation_Single_Wall_Sloped_Pipe_w_MARMAC_Coupler_(Detail_803_02-16)-Model Installation_Positive_Projection_Embankment_(Detail_102_01-16)-Model Installation_Sand_Embedment_of_Corrugated_Polyethylene_Pipe Installation_Single_Wall_Sloped_Pipe_w_Dbl_Wide_Split_Coupler_Stainless_Steel_(Detail_802B_02-16)-Model Soil_Classes_of_Embedment_and_Backfill_Materials_(Detail_109_01-16)-Model Installation_Single_Wall_Sloped_Pipe_w_Double_Wide_Split-Coupler_(Detail_802A_02-16)-Model Installation_Pipe_Anchoring_12in_to_60in_(Detail_104_01-16)-Model Drainage_Handbook_ADH5_Installation_(11-16) Installation_Flowable_Fill_for_Thermoplastic_Pipe_(Tech_Note_A5.02)2 Installation_HP_Storm_12in_to_60in_HDPE_Pipe_Trench_(Detail_101D_01-09)-Model Installation_HP_Storm_Riser_Tee_12in_to_24in_Pipe_(Detail_406_02-16)-Model Installation_HP_Storm_Riser_Tee_30in_to_60in_Pipe_(Detail_407_02-16))-Model Integral_Bell_Transition_for_HP_Pipe_(Tech_Note_A5.15) Recommended_Use_of_Trench_Boxes_(Tech_Note_A5.01) Trench_Installation_Alternate_HP_Storm_12in_to_60in_HDPE_Pipe_(Detail_101E_01-16)-Model Installation_Concrete_Anchors_Steeply_Sloped_Pipe_(Detail_804_02-16)-Model Installation_Culvert_Mitered_End_(Detail_302_02-16)-Model Installation_Culvert_Mitered_End_Section_(Product_Detail_301_02-16)-Model Installation_French_Drain_Perforated_HDPE_Pipe_(Detail_106A_01-16)-Model Corrugated_Plastic_Pipe_Storm Installation_Guide_09_17 Installation_HDPE_Riser_Tee_12in_to_24in_(Detail_404_02-16)-Model Installation_HDPE_Riser_Tee_30in_to_60in_(Detail_405_02-16)-Model Trench_Installation_Flowable_Fill_12in_to_60in_Pipe_(Detail_101G_01-16)-Model Trench_Installation_Parallel_Pipe_10in_to_60in_(Detail_103_1-16)-Model Trench_Installation_Geotextile_Wrap_HDPE_4in_to_60in_Pipe_(Detail_101B_10-06)-Model Trench_Installation_Perf_Pipe_4in_to_60in_HDPE_Pipe_(Detail_101C_01-16)-Model Trench_Installation_Railway_4in_to_60in_HDPE_Pipe_(Detail_107A_01-16)-Model Utility_Crossings_HDPE_(A5.09_20-08)) Utility_Crossings_Thermo_Plastic_(Tech_Note_A5_09_11-13) PE_Section_for_Culvert_Applications_(Product_Note_3.104) NC_DI_Manual_(10623)_01-10 NY_DI_Manual_(10773_11-11) OH_DI_Manual_(10775)_02-11 Drainage_Handbook_ADH7_Sanitary_Sewer_Systems_(03-16) Installation_Guide_SaniTite_HP_Brochure_(10667_10-13) Installation_Guide_SaniTite_HP_Pipe_Sanitary_(08-16) Installation_Guide_SaniTite_HP_MH_Adapter_(IG_1.06_07-14) Installation_SaniTite_HP_12in_to_60in_Pipe_Trench_(Detail_101F_01-17)-Model Installation_SaniTite_HP_Standard_Trench_(Detail_110) Installation_SaniTite_HP_Tee_Base_w_Precast_Riser_(Detail_410_02-16)-Model Installation_SaniTite_HP_Tee_Base_w_SaniTite_HP_Riser_Less_than_13ft_(Detail_408_02-16)-Model Installation_SaniTite_HP_Tee_Base_w_SaniTite_HP_Riser_Less_than_20ft_(Detail_409_02-16)-Model SaniTite_HP_Pipe_Repair_Options_(Tech_Note_A5.13-ID_9738) SaniTiti_HP_12_to_30_in_MH_Boot_and_Corr_Adapter_(Detail_205C) SaniTite_HP_12_to_30_in_MH_Pre-Cast_Compression_Gasket_Detail_(205A) SaniTite_HP_30_to_60_in_MH_Boot_Detail_(205E) SaniTite_HP_30_to_60_in_MH_Pre-Cast_Compression_Gasket_Detail_(205B) Installation_Lining_of_Casings_Sanitite_HP_(Detail_110_01-16)-Model Installation_Guide_Agricultural_Pipe_(IG1.03A) Installation_Guide_Agricultural_N12_ASTM_F2648_HDPE_Pipe_(IG1.03DW_11-14) Installation_Agriculture_Shaped_Trench_(Detail_108_01-16)-Model Installation_Guide_Agricultural_N12_AASHTO_HDPE_Pipe_(1.03PE_11-14)

Specifications

Details - Product

Single_Wall_Perf_Patterns_(Tech_Note_A1.02) Connection_HP_Storm_to_RCP_w_MarMac_(Detail_604A_02-16)-Model Connection_MH_Boot_and_Corr_Adapter_Gasket_12in_to_60in_HP_Storm_(Detail_207B_02-16)-Model Connection_MH_Boot_and_Fitting_12in_to_24in_HP_Storm_(Detail_207C_02-16)-Model Connection_MH_Boot_or_Compression_Gasket_and_Fitting_12_to_60_HP_Storm_(Detail_207D_03-16)-Model Connection_MH_Grouted_12in_to_60in_HDPE_PP_(Detail_202_03-16)-Model Connection_MH_Grouted_Waterstop_12in_to_60in_HP_Storm_(Detail_206A_02-16)-Model Connection_MH_Grouted_Waterstop_30in_to_60in_HP_Storm_Triplewall_(Detail_206D_02-16)-Model Connection_MH_Mechanical_12in_to_36in_HP_Storm_(Detail_207E_02-16)-Model Connection_MH_Precast_Compression_Gasket_12in_to_24in_HP_Storm_(Detail_207A_02-16)-Model Connection_MH_Waterstop_Cast-in-Place_30in_to_60in_HP_Storm_Triplewall_(Detail_206C_02-16)-Model Connection_Water_Tight_MH_Waterstop_Cast-in-Place_12in_to_30in_HP_Storm_(Detail_206B_02-16)-Model Aircraft_Landing_Gear_Footprint_HP_Storm_(Detail_111G_03-16)-Model Connection_HDPE_and_HP_Storm_to_Manholes_and_Structures_A5.04_March_2016 Connection_HDPE_Bell_to_RCP_(Detail_605_02-16)-Model Installation_Culvert_Mitered_End_Section_(Product_Detail_301_02-16)-Model Connection_HDPE_CMP_(Detail_601) Connection_HDPE_CMP_wMarMac_(Detail_602) Connection_HDPE_RCP_(Tech_Note_603) Perforation_Patterns_DW_HDPE_Pipe_(Tech_Note_A101_01-15) Connection_HDPE_RCP_Bell_(Tech_Note_605) Connection_HDPE_RCP_w_MarMac_(tech_Note_604) Connection_HDPE_to_CMP_w_Geotextile_Wrap_(Detail_601_02-16)-Model Connection_HDPE_to_CMP_w_MarMac_(Detail_602_02-16)-Model Connection_HDPE_to_HDPE_(Detail_607_02-16)-Model Connection_HDPE_to_HDPE_w_MarMac_(Detail_608_02-16)-Model Connection_HDPE_to_Manholes_and_Structures_(Tech_Note_A5.04) Connection_HDPE_to_RCP_w_Geotextile_Wrap_(Detail_603_02-16)-Model Connection_HDPE_to_RCP_w_MarMac_(Detail_604_02-16)-Model Connection_HDPE_to_Structure_(Detail_201_01-17)-Model Connection_Integral_Bell_Transition_for_HDPE_Pipe_(Tech_Note_A5.10_01-10) Connection_Integral_Bell_Transition_for_HP_Pipe_(Tech_Note_A5.15_01-10) Connection_MH_Grouted_Waterstop_12in_to_60in_HDPE_(Detail_203_01-16)-Model Connection_Soil_Tight_MH_Nyloplast_Adapt_12in_to_24in_HDPE_(Detail_202A_01-16)-Model Connection_Water-Tight_MH_Boot_Adapter_12in_to_24in_HDPE_(Detail_204F_01-16)-Model Connection_Water-Tight_MH_Boot_Adapter_12in_to_60in_HDPE_(Detail_204B_01-16)-Model Connection_Water-Tight_MH_Gasket_and_Corr_Pipe_Adapter_Gasket_12_to_60_HDPE_(Detail_204E_02-16)-Model Connection_Water-Tight_MH_Mechanical_12in_to_36in_HDPE_(Detail_204D_02-16)-Model Connection_Water-Tight_MH_Precast_Compression_Gasket_12in_to_60in_HDPE_(Detail_204A_02-16)-Model Connection_Water-Tight_MH_Precast_Compression-Gasket_12in_to_24in_HDPE_(Detail_204C_02-16)-Model HDPE_Dual_Wall_Pipe_Perforation_Patterns_(Tech_Note_A1.01) N-12 Mitered Joint Pusher_(Detail_6086) Pipe_Flotation_(Tech_Note_5.05_03-16) Pipe_Joints_and_Gaskets_(Tech_Note_A1.05) SaniTite_HP_(Product_Detail_1300_01-17)-Model Connection_Drop_Manhole_12in_to_24in_SaniTite_HP_(Detail_208_02-16)-Model Fittings_SaniTite_HP _12_to_30_in_MH_Boot_and_Fitting_Detail_(205D) Connection_Drop_Manhole_30in_to_60in_SaniTite_HP_(Detail_209_02-16)-Model Connection_MH_Push-Thru_Manhole_30in_to_60in_SaniTite_HP_(Detail_205G_06-16)-Model Connection_SaniTite_HP_to_Dissimiliar_Pipe_Connection(Detail_606_-Model Connection_SaniTite_HP_to_RCP_w_MarMac(Detail_604B_02-16)-Model Connection_Water_Tight_SaniTite_HP_to_RCP_w_MarMac_(Detail_604C_04-16)-Model Connection_Water_Tight_MH_Boot_30in_to_60in_SaniTite_HP_(Detail_205E_01-16)-Model Connection_Water_Tight_MH_Boot_and_Corr_Adapter_Gasket_12in_to_30in_SaniTite_(Detail_205C_01-16)-Model Connection_Water_Tight_MH_Pre-Cast_Compression_Gasket_12in_to_24in_SaniTite_HP_(Detail_205A_06-16)-Model Connection_Water_Tight_MH_Pre-Cast_Compression_Gasket_30in_to_60in_SaniTite_HP_(Detail_205B_01-16)-Model

Inspect. & Maintenance. - Technical Literature

Structural Design - Technical Literature

Hydraulics - Technical Literature

Durability - Technical Literature

Fittings

Configurators & Calculators

Case Studies/Approvals

Article_IL_Fast_Paced_Rehab_HP_Drainage_Contractor_(04-16) Article_IL_Runway_Rehab_Scott_Air_Force_Base__Mascoutah__IL_HP_Storm_(GOV_ENG_) Article_FL_Daytona_Speedway_HP_Water___Waste_(03-16)(1) Article_FL_Needs-of-Florida_Ditchmen_(07-14) Article_OH_Columbus_Airport_HP_(10869_CENEWS_11-12) Article_MN_HP_Storm_richfield engineering_MN_(08-14)_ Article_MO_HP_Replaces_Brick_Mortar_APWA_MO_(10-13) Article_MS_Airfield_Nocover_Water___Waster_(20152_10-15)(1) PP_vs._RCP_Pipe_Comparison__12-16 CSE - Major interchange revamp Relieves Congestion Feb 2018 Approval_GA_N12_DOT_(06-06) Approval_MO_St_Louis_MSD_Pipe_(05-08) Approval_FLDOT_HDPE-(1009) Approval_NJ_DOT_AD1070809 Approval_RI_HWY_(AD105080_08-09) Approval_WA_DOT_(AD040113_09-08)) Approval_OR_DOT_(AD030113_02-13) Article_Depth_Perception_Waterworld_(04-13) Article_Drainage_Designs_ADS_CENews_(10-08) Article_EAW_Case_Plastic_Pipe_Institute_(Dec-2016 Article_IN_Projects_planned_in_Merrillville_Lake_County_News_Stormwater_(12-16) Article_NH_Highway_Runoff__Beyond_the_Highway_(08-16) Article_N12_Lower_Cost_DOT_Roads___Bridges_(98)(1) Article_ME_Rehab_CSO_Lewiston_Underground_N-12)(01-14) Article_NE_HDPE_Airport_Expansion_grand_forks_land_and_water_proof_(03-10) Article_SOL_N-12_Rehab_Storm_Stormwater_(03-15) Article_IL_Withstanding_Excessive_Loads_iwwd-(09-15) PE_Section_for_Culvert_Applications_(Product_Note_3.104) Mailer_Approval_TX_Houston_HDPE_(08-08) Approval_NV_Clark_Co_Sanitite_HP Article_Everything-About-Wateradding-sanitary-sewer_(11-14)- Article_EAW_Adding_Sanitary_Sewer Article_NY_Sanitite_HP_A_Beter_Replacement_(03-15) Article_MN_Richfield_engineering_HP_SaniTite_(08-14) Article_MI_Southgate_stems_sanitar_sewer_overflow_HP_Waterworld_(11-15) Article_SaniTite_HP_Stormwater_(ADS_09-15) Sanitary Sewer Pump Station Water & Waste Digest magazine January 2018

Brochure