Irrigation - Ditch Enclosure

Open ditches and irrigation channels can be enclosed by pipe to create a more efficient pathway for water flow. Not only do ditch enclosures improve the safety and aesthetic value of an area, it also augments the performance of the ditch overall. By enclosing irrigation channels, it is easier to mitigate the loss of water caused by evaporation and infiltration. ADS offers N-12 Low Head Pipe to meet the increasing challenges of water transmission. This High Density Polyethylene (HDPE) pipe provides structural strength, joint integrity, flow capacity, flexibility and economy to serve the important needs of this market.

ProductsDocuments

Documents

Submittal Packages

Installation Guides

Drainage_Handbook_ADH5_Installation_(11-16) Installation_Flowable_Fill_for_Thermoplastic_Pipe_(Tech_Note_A5.02)2 Installation_HP_Storm_12in_to_60in_HDPE_Pipe_Trench_(Detail_101D_01-09)-Model Installation_HP_Storm_Riser_Tee_12in_to_24in_Pipe_(Detail_406_02-16)-Model Installation_HP_Storm_Riser_Tee_30in_to_60in_Pipe_(Detail_407_02-16))-Model Integral_Bell_Transition_for_HP_Pipe_(Tech_Note_A5.15) Recommended_Use_of_Trench_Boxes_(Tech_Note_A5.01) Trench_Installation_Alternate_HP_Storm_12in_to_60in_HDPE_Pipe_(Detail_101E_01-16)-Model Drainage_Handbook_ADH7_Sanitary_Sewer_Systems_(03-16) Installation_Guide_SaniTite_HP_Brochure_(10667_10-13) Installation_Guide_SaniTite_HP_Pipe_Sanitary_(08-16) Installation_Guide_SaniTite_HP_MH_Adapter_(IG_1.06_07-14) Installation_SaniTite_HP_12in_to_60in_Pipe_Trench_(Detail_101F_01-17)-Model Installation_SaniTite_HP_Standard_Trench_(Detail_110) Installation_SaniTite_HP_Tee_Base_w_Precast_Riser_(Detail_410_02-16)-Model Installation_SaniTite_HP_Tee_Base_w_SaniTite_HP_Riser_Less_than_13ft_(Detail_408_02-16)-Model Installation_SaniTite_HP_Tee_Base_w_SaniTite_HP_Riser_Less_than_20ft_(Detail_409_02-16)-Model SaniTite_HP_Pipe_Repair_Options_(Tech_Note_A5.13-ID_9738) SaniTiti_HP_12_to_30_in_MH_Boot_and_Corr_Adapter_(Detail_205C) SaniTite_HP_12_to_30_in_MH_Pre-Cast_Compression_Gasket_Detail_(205A) SaniTite_HP_30_to_60_in_MH_Boot_Detail_(205E) SaniTite_HP_30_to_60_in_MH_Pre-Cast_Compression_Gasket_Detail_(205B) Soil_Classes_of_Embedment_and_Backfill_Materials_(Detail_109_01-16)-Model Installation_Lining_of_Casings_Sanitite_HP_(Detail_110_01-16)-Model

Specifications

Details - Product

Connection_HP_Storm_to_RCP_w_MarMac_(Detail_604A_02-16)-Model Connection_MH_Boot_and_Corr_Adapter_Gasket_12in_to_60in_HP_Storm_(Detail_207B_02-16)-Model Connection_MH_Boot_and_Fitting_12in_to_24in_HP_Storm_(Detail_207C_02-16)-Model Connection_MH_Boot_or_Compression_Gasket_and_Fitting_12_to_60_HP_Storm_(Detail_207D_03-16)-Model Connection_MH_Grouted_12in_to_60in_HDPE_PP_(Detail_202_03-16)-Model Connection_MH_Grouted_Waterstop_12in_to_60in_HP_Storm_(Detail_206A_02-16)-Model Connection_MH_Grouted_Waterstop_30in_to_60in_HP_Storm_Triplewall_(Detail_206D_02-16)-Model Connection_MH_Mechanical_12in_to_36in_HP_Storm_(Detail_207E_02-16)-Model Connection_MH_Precast_Compression_Gasket_12in_to_24in_HP_Storm_(Detail_207A_02-16)-Model Connection_MH_Waterstop_Cast-in-Place_30in_to_60in_HP_Storm_Triplewall_(Detail_206C_02-16)-Model Connection_Water_Tight_MH_Waterstop_Cast-in-Place_12in_to_30in_HP_Storm_(Detail_206B_02-16)-Model Aircraft_Landing_Gear_Footprint_HP_Storm_(Detail_111G_03-16)-Model SaniTite_HP_(Product_Detail_1300_01-17)-Model Connection_Drop_Manhole_12in_to_24in_SaniTite_HP_(Detail_208_02-16)-Model Fittings_SaniTite_HP _12_to_30_in_MH_Boot_and_Fitting_Detail_(205D) Connection_Drop_Manhole_30in_to_60in_SaniTite_HP_(Detail_209_02-16)-Model Connection_MH_Push-Thru_Manhole_30in_to_60in_SaniTite_HP_(Detail_205G_06-16)-Model Connection_SaniTite_HP_to_Dissimiliar_Pipe_Connection(Detail_606_-Model Connection_SaniTite_HP_to_RCP_w_MarMac(Detail_604B_02-16)-Model Connection_Water_Tight_SaniTite_HP_to_RCP_w_MarMac_(Detail_604C_04-16)-Model Connection_Water_Tight_MH_Boot_30in_to_60in_SaniTite_HP_(Detail_205E_01-16)-Model Connection_Water_Tight_MH_Boot_and_Corr_Adapter_Gasket_12in_to_30in_SaniTite_(Detail_205C_01-16)-Model Connection_Water_Tight_MH_Pre-Cast_Compression_Gasket_12in_to_24in_SaniTite_HP_(Detail_205A_06-16)-Model Connection_Water_Tight_MH_Pre-Cast_Compression_Gasket_30in_to_60in_SaniTite_HP_(Detail_205B_01-16)-Model

Inspect. & Maintenance. - Technical Literature

Structural Design - Technical Literature

Hydraulics - Technical Literature

Durability - Technical Literature

Fittings

Case Studies/Approvals

Brochure