ADS StormTech Design Tool

Drainage Handbook

CAD Drawings

Request an Estimate

ADS Design Pro – Swapping Parts

All the fittings in the four corners of a system may be swapped out for another fitting.
A 90-degree bend can be replaced with a tee and vice versa. The orientation of a tee can also be changed from Horizontal to Vertical and vice versa. To do this one simply needs to double click on the part and in the Detail View window (figure 9.), choose the desired option. The 90-degree bend becomes a tee.(figure 10.)

figure 9.



figure 10.

Adding A Reducer

A tee on any of the four corners can also have a reducer added to it. To do this the user simply double clicks on the tee (figure 11.) and selects the desired reducer from the detail view window (figure 12.).

figure 11.


figure 12.